Publications

Complete lists of publications are available for Prof Jianguo Lin, Dr Daniel Balint, Dr Liliang Wang, Dr Jun Jiang and Dr Zhusheng Shi.

Selected publications before 2016 include:

Books

• Lin J, 2015, Fundamental of materials modelling for metal processing technologies, World Publishing – Imperial College Press, ISBN: 978-1-78326-496-4.
• Lin J, Balint D, Pietrzyk M, 2012, Microstructural evolution in metal forming processes: Modelling and Applications, Woodhead Publishing, ISBN 978-0-85709-074-4.

2016

• Zheng Z, Balint D, Dunne F, 2016, Rate Sensitivity in Discrete Dislocation Plasticity in Hexagonal Close-packed Crystals, Acta Mater, Vol: 107, Pages: 17-26.
• Jiang J, Zhang T, Dunne F, Britton B, 2016, Deformation compatibility in a single crystalline Ni superalloy, Proc. R. Soc. A., Vol: 472, Issue: 2185.
• Sun J, Dillon F, Wu C, Jiang J, Jurkschat K, Koós A, Crossley A, Grobert N, Castell M, 2016, Metal-free chemical vapor deposition growth of graphitic tubular structures on engineered perovskite oxide substrates, Carbon, Vol: 99, Pages: 591–598.
• Li Y, Shi Z, Lin J, Yang Y, Huang B, Chung T, Yang J, 2016, Experimental investigation of tension and compression creep-ageing behaviour of AA2050 with different initial tempers, Materials Science and Engineering A, Vol: 657, Pages: 299–308.
• Li N, Lin J, Balint D, Dean T, Dry D, 2016, Experimental Characterisation of the Effects of Thermal Conditions on Austenite Formation for Hot Stamping of Boron Steel, J. of Mater. Proc. Tech., Vol: 231, Pages: 254–264. 

 2015

• Zheng K, Politis D, Lin J, Dean T, 2015, An experimental and numerical investigation of the effect of macro-textured tool surfaces in hot stamping, Int. J. of Mater. Forming, DOI: 10.1007/s12289-015-1273-4.
• Lam A, Shi Z, Huang X, Yang Y, Zeng Y, Lin J, 2015, Material modelling and its application to creep-age forming of aluminium alloy 7B04. Manufacturing Review, Vol: 2, Issue: 19, Pages: 1 - 7. 
• Li N, Sun C, Guo N, Mohamed M, Lin J, Matsumoto T, Liu C, 2016, Experimental investigation of boron steel at hot stamping conditions, J. of Materials Processing Technology, Vol: 228, Pages: 2–10.
• Lam A, Shi Z, Lin J, Huang X, 2015, Influences of residual stresses and initial distortion on springback prediction of 7B04-T651 aluminium plates in creep-age forming, Int. J. Mech. Sci.,  Vol: 103, Pages: 115–126.
• Wang X, Ahn J, Bai Q, Lu W, Lin J, 2015,  Effect of forming parameters on electron beam Surfi-Sculpt protrusion for Ti-6Al-4V, Materials & Design, Vol:76, Pages: 202-206.
• Liu J, Wang L, Lee J, Chen R, El-Fakir O, Chen L, Lin J, Dean T, 2015, Size-dependent mechanical properties in AA6082 tailor welded specimens, J. Mat. Proc. Tech., Vol: 224, Pages: 169-180. 
• Bai Q, Lin J, Tian G, Zou J, Dean T, 2015, Review and analysis of powder prior boundary (PPB) formation in powder metallurgy processes for superalloys, J. of Powder Metallurgy & Mining, Vol: 4, Issue: 1, Pages: 1000127.
• Huo Y, Bai Q, Wang B, Lin J, Zhou J, 2015, A new application of unified constitutive equations for cross wedge rolling of a high-speed railway axle steel, J. of Materials Processing Technology, Vol: 223, Pages: 274–283.  
• Lam A, Shi Z, Lin J, Huang X, Zeng Y, Dean T, 2015, A method for designing lightweight and flexible creep-age forming tools using mechanical splines and sparse controlling points, Int. J. Adv. Manuf. Technol.,  Vol: 80, Pages: 361–372.
• Lam A, Shi Z, Yang H, Wan L, Davies C, Lin J, Zhou S, 2015, Creep-age forming AA2219 plates with different stiffener designs and pre-form age conditions: Experimental and finite element studies, J. of Materials Processing Technology, Vol: 219, Pages: 155–163.
• Bai Q, Lin J, Jiang J, Dean T, Zou J, Tian G, 2015, A study of direct forging process for powder superalloys, Mat. Sci. Eng. A, Vol: 621, Pages: 68–75.  
• Zhang T, Jiang J, Shollock B, Britton B, Dunne F, 2015, Slip localization and fatigue crack nucleation near a non-metallic inclusion in polycrystalline, Mat. Sci. Eng. A, Vol: 641, Pages: 328-339.
• Jiang J, Britton B, Wilkinson A, 2015, The orientation dependence of dislocation structure evolution in monotonically deformed polycrystalline copper, Int. J. Plasticity. Vol: 69, Pages: 102-117.
• Gurrutxaga-Lerma B, Balint D, Dini D, Sutton A, 2015, Elastodynamic Image Forces on Dislocations, P. Roy. Soc. A-Math. Phy., Vol: 471, Pages:1-20.
• Mercer C, Lee J, Balint D, 2015, An Investigation of the Mechanical Fatigue Behavior of Low Thermal Expansion Lattice Structures, Int. J. Fatigue, Vol: 81, Pages: 238-248.
• Gurrutxaga-Lerma B, Balint D, Dini D, Sutton A, 2015, The Mechanisms Governing the Activation of Dislocation Sources in Aluminum at Different Strain Rates, J. Mech. Phys. Solids,  Vol: 84, Pages: 273-292.
• Junyi L, Balint D, 2015, An Inverse Method to Determine the Dispersion Curves of Periodic Structures Based on Wave Superposition, J. Sound Vib., Vol: 350, Pages: 41-72.
• Gurrutxaga-Lerma B, Balint D, Dini D, Eakins D, Sutton A, 2015, On the Attenuation of the Dynamic Yield Point of Shocked Aluminum using Elastodynamic Simulations of Dislocations Dynamics, Phys. Rev. Lett. Vol: 114, Issue: 174301, Pages: 1-5. 
• Gurrutxaga-Lerma B, Balint D, Dini D, Eakins D, Sutton A, 2015, The Role of Homogeneous Nucleation in Planar Dynamic Discrete Dislocation Plasticity, J. Appl. Mech. Vol: 82, Pages: 1-12.
• Tarleton E, Balint D, Gong J, Wilkinson A, 2015, A Discrete Dislocation Plasticity Study of the Micro-cantilever Size Effect, Acta Mater., Vol: 88, Pages: 271-282.
• Das S, Barekar N, El-Fakir O, Wang L, Rao A, Patel J, Kotadia H, Bhagurkar A, Dear J, Fan Z, 2015, Effect of melt conditioning on heat treatment and mechanical properties of AZ31 alloy strips produced by twin roll casting, Mat. Sci. Engn. A-Struc. Mat. Pro. Micro Proc, Vol: 620, Pages: 223-232
• Gao H, Li N, Ho H, Zhang Y, Zhang N, Wang L, Lin J, 2015, Determination of a Set of Constitutive Equations for an Al-Li Alloy at SPF Conditions, Mat. Today: Proc., Vol: 2, Pages: S409-S413
• Hu Y, Yuan X, Ma G, Masen MA, Wang L, 2015, Tool-life prediction under multi-cycle loading during metal forming: a feasibility study, Manu. Rev, Vol: 2, Pages: 28-28.
• Ji K, El-Fakir O, Gao H, Wang L, 2015, Determination of Heat Transfer Coefficient for Hot Stamping Process, Mat. Today: Proc, Vol: 2, Pages: S434-S439.
• Liu J, Wang L, Lee J, Chen R, El-Fakir O, Chen L, Lin J, Dean TA, 2015, Size-dependent mechanical properties in AA6082 tailor welded specimens, J. Mat. Proc. Tech., Vol: 224, Pages: 169-180.
• Ma G, Wang L, Gao H, Zhang J, Reddyhoff T, 2015, The friction coefficient evolution of a TiN coated contact during sliding wear, App. Surf. Sci., Vol: 345, Pages: 109-115.
• Jiang J, Yang J, Zhang T, Dunne F, Britton B, 2015, On the mechanistic basis of  fatigue crack nucleation in Ni superalloy containing inclusions using high resolution electron backscatter diffraction, Acta Materialia, Vol: 97, Pages: 367-379.
• Tong V, Jiang J, Wilkinson A, Britton B, 2015, The effect of pattern overlap on the accuracy of high resolution electron backscatter diffraction. Ultramicroscopy, Vol: 155, Pages: 62-73. 
• Jiang J, Britton B, Wilkinson A, 2015, Evolution of geometrically necessary dislocation distribution in cyclically deformed polycrystalline copper. Acta. Mat., Vol: 94, Pages: 193-204. 
• Zhang T, Jiang J, Shollock B, Britton B, Dunne F, 2015, Slip localization and fatigue crack nucleation near a non-metallic inclusion in polycrystalline. Mat. Sci. Eng. A, Vol: 641, Pages: 328-339.
• Jiang J, Britton B, Wilkinson A, 2015, The orientation dependence of dislocation structure evolution in monotonically deformed polycrystalline copper. Int. J. Plas., Vol: 69, Pages: 102-117. 

 2014

• Raugei M, El-Fakir O, Wang L, Lin J, Morrey D, 2014, Life cycle assessment of the potential environmental benefits of a novel hot forming process in automotive manufacturing, J. Cleaner Production, Vol: 83, Pages: 80-86.
• Sun C, Liu G, Zhang Q, Li R, Wang L, 2014, Determination of hot deformation behavior and processing maps of IN 028 alloy using isothermal hot compression test, Mats. Sci. Eng. A, Vol: 595, Pages: 92-98.
• Wilkinson A, Tarleton E, Vilalta-Clemente A, Jiang J, Britton B, Collins D, 2014, Measurement of Probability Distributions for Internal Stresses in Dislocated Crystals. App. Phy. Lett., Vol: 105, Issue: 18, Pages: 181907.
• Bai Q, Lin J, Tian G, Balint D, Zou J, 2014, A Novel Forming Process for Powder Metallurgy of Superalloys, Key Eng. Mats, Vol: 622, Pages: 833-839.
• Politis D, Lin J, Dean T, Balint D, 2014, An investigation into the forging of Bi-metal gears, J. of Materials Proc. Tech. Vol: 214, Pages: 2248–2260.
• Sun C, Bai Q, Lin J, Matsumoto T, Dean T, 2014, The effect of process and model parameters in temperature prediction for hot stamping of boron steel, Adv.Mech. Eng., Vol: 2014, Pages: 1-10. 
• Betts C, Balint D, Lee J, Lin J, Lee P, 2014, In situ micro-tensile testing and X-ray micro tomography-based finite element modelling of open-cell metal foam struts and sandwich panels, J. of Strain Analysis for Engineering Design, Vol: 49, Issue: 8, Pages: 592-606. 
• Kardoulaki E, Lin J, Balint D, Farrugia D, 2014, Investigation of the effects of thermal gradients present in Gleeble high-temperature tensile tests on the strain state for free cutting steel, J. of Strain Analysis for Engineering Design, Vol: 49, Issue: 7, Pages: 521-532. 
• Raugei M, El-Fakir O, Wang L, Lin J, Morrey D, 2014, Life cycle assessment of the potential environmental benefits of a novel hot forming process in automotive manufacturing, J. of Cleaner Production, Vol: 83, Pages: 80-86.
• Aaron C, Lin J, 2014, A validated analytical solution for the two-dimensional bending of aluminium plates under creep-ageing conditions, Key Eng. Mat., Vol: 622, Pages: 1107-1116.
• Politis N, Politis D, Davies C, Lin J, Dean T, 2014, An experimental and numerical investigation into forming force reduction in precision gear forging, Key Eng. Mat., Vol: 622, Pages: 165-173.
• El-Fakir O, Das S, Stone I, Scamans G, Fan Z, Wang L, Balint D, Dear J, Lin J, 2014, Solution Heat treatment, forming and in-die quenching of a commercial sheet magnesium alloy into a complex-shaped component: experimentation and FE analysis, Key Eng. Mat., Vol:622, Pages 596-602.
• Bai Q, Lin J, 2014, Application of finite element method in hot forming of titanium alloy aircraft engine blades, J. Aeronautical Materials, Vol: 34, Issue: 4, Pages: 62-71.
• Shao Z, Bai Q, Lin J, 2014, A novel experimental design to obtain forming limit diagram of aluminium alloys for solution heat treatment, forming and in-die quenching process, Key Eng. Mat., Vol: 622, Pages: 241-248.
• El-Fakir O, Wang L, Balint D, Dear J, Lin J, Dean T, 2014, Numerical study of the solution heat treatment, forming, and in-die quenching (HFQ) process on AA5754, Int. J. Machine Tools & Manu., Vol: 87, Pages:39-48.
• Politis D, Lin J, Dean T, Balint D, 2014, An investigation into the forging of Bi-metal gears, J Mat Proc Tech, Vol: 214, Pages:2248-2260.
• Lin J, Mohamed M, Balint D, Dean T, 2014, The development of continuum damage mechanics-based theories for predicting forming limit diagrams for hot stamping applications, Int. J. Damage Mech., Vol:23, Pages:684-701.

 Selected publications before 2014

• Kaye M, Puncreobutr C, Lee P, Balint D, Connolley T, Farrugia D, Lin J, 2013, A new parameter for modelling three-dimensional damage evolution validated by synchrotron tomography, Acta Mat., Vol:61, Pages:7616-7623.
• Bai Q, Lin J, Zhan L, Dean T, Balint D, Zhang Z, 2012, A new method for determining interfacial heat transfer coefficient and its application in hot/warm forming, Steel Research Int., Vol: 10, Pages:1035-1038.
• Wang L, Zhou J, Duszczyk J, Katgerman L, 2012, Identification of a friction model for the bearing channel of hot aluminium extrusion dies by using ball-on-disc tests, Trib. Int., Vol: 50, Pages: 66-75.
• Wang L, Strangwood M, Balint D, Lin J, Dean T, 2011, Formability and failure mechanisms of AA2024 under hot forming conditions, Mat. Sci. Eng. A, Vol: 528, Pages:2648-2656.
• Hayhurst D, Lin J, Hayhurst R, 2008, Failure in notched tension bars due to high-temperature creep: Interaction between nucleation controlled cavity growth and continuum cavity growth, Int. J. of Solids and Structures, Vol: 45, Pages: 2233-2250.
• Cao J, Lin J, 2008, A Study on formulation of objective functions for determining material models, Int. J. of Mech. Sci., Vol: 50, Pages: 193-204.
• Balint D, Deshpande V, Needleman A, Van der Giessen E, 2008, Discrete dislocation plasticity analysis of the size dependence of the flow strength of polycrystals, Int. J. of Plasticity, Vol: 24, Pages: 2149 - 2172.
• Cao J, Lin J, Dean T, 2008, An implicit unitless error and step-size control method in integrating unified viscoplastic/creep ODE-type constitutive equations, Int. J. for Numerical Methods in Eng., Vol: 73, Pages: 1094-1112.
• Foster A, Lin J, Farrugia D, Dean T, 2007, An Investigation into Damage Nucleation and Growth for a Free-Cutting Steel at Hot Rolling Conditions, J. of Strain Analysis., Vol: 42, Pages: 227-235.
• Luo J, Lin J, 2007, A study on the determination of plastic properties of metals by instrumented indentation using two sharp indenters, Int. J. of Solids and Structures.,  Vol: 44, Pages: 5803-5817.
• Deshpande V, Balint D, Needleman A, Van der Giessen E, 2007, Size effects in single asperity frictional contacts, Model Siml. Mater. Sci., Vol: 15, Pages: S97 - S108.
• Lin J, Foster A, Liu Y, Farrugia D, Dean T, 2007, On micro-damage in hot metal working Part 2: Constitutive modelling, J. of Engineering Transactions., Vol: 55, Issue: 1, Pages: 1-18.
• Liu Y, Foster A, Lin J, Farrugia D, Dean T, 2006, On micro-damage in hot metal working Part 1: Experimental investigation, J. of Engineering Transactions., Vol: 54, Issue: 4, Pages: 271-287.
• Lin J, Luo J, Dean T, 2007, Techniques for determining mechanical properties of power-law materials by instrumented indentation tests, Key Eng. Mat., Vol: 340-341, Pages: 555-562.
• Wang F, Zhu Q, Lin J, 2007, Prediction of spatial variation of microstructural evolution in hot rolling, World J. of Eng., Vol: 3, Issue: 4, Pages: 9-18.
• Dunne F, Lin J, Hayhurst D, Makin J, 2006, Modelling creep, ratchetting and failure in structural components subjected to thermo-mechanical loading, J. of Theo. App. Mech., Vol: 44, Issue: 3, Pages: 667-689
• Balint D, Deshpande V, Needleman A, Van der Giessen E, 2006, Discrete dislocation plasticity analysis of the wedge indentation of films, J Mech Phys Solids, Vol: 54, Pages: 2281 – 2303.
• Luo J, Lin J, Dean T, 2006, A study on the determination of mechanical properties of a power law material by its indentation force-depth curve, Phil. Mag., Vol: 86, Issue: 19, Pages: 2881-2905.
• Lin J, Ho K, Dean T, 2006, An integrated process for modelling of precipitation hardening and springback in creep age-forming, Int. J. of Machine Tools & Manufacture, Vol: 46, Pages:1266-1270.
• Balint D, Deshpande V, Needleman A, Van der Giessen E, 2006, Size effects in uniaxial deformation of single and polycrystals: a discrete dislocation plasticity analysis, Model Simul. Mater. Sci., Vol: 14, Pages: 409 – 422.
• Jeunechamps P, Ho K, Lin J, Ponthot J, Dean T, 2006, A closed form technique to predict springback in creep age-forming, Int. J. of Mech. Sci., Vol: 48, Pages: 621-629.
• Liu Y, Lin J, Dean T, Farrugia D, 2005, A numerical and experimental study of cavitation in a hot tensile axisymmetric testpiece, J. of Strain Analysis, Vol: 40, Issue: 6, Pages: 571-586.
• Lin J, Liu Y, Dean T, 2005, A review on damage mechanisms, models and calibration techniques, Int. J. of Damage Mechanics, Vol: 14, Pages: 299-319.
• Wong C, Lin J, Dean T, 2005, Effects of roller path and geometry on the flow forming of solid cylindrical components, J. of Mat. Proc. Tech., Vol: 167, Pages; 344-353.
• Balint D, Deshpande V, Needleman A, Van der Giessen E, 2005, Discrete dislocation plasticity analysis of crack-tip fields in polycrystalline materials, Philos. Mag, Vol: 85, Pages: 3047 - 3071
• Lin J, Kowalewski Z, Cao J, 2005, Creep rupture of copper and aluminium Alloy under combined loadings-- Experiments and their various descriptions, Int. J. of Mech. Sci., Vol: 47, Pages: 1038-1058.
• Lin J, Dean T, 2005, Modelling of microstructure evolution in hot forming using unified constitutive equations, J. of Mat. Proc. Tech., Vol: 167, Pages: 354-362.
• Balint D, Deshpande V, Needleman A, Van der Giessen E, A discrete dislocation plasticity analysis of grain-size strengthening, Mat Sci Eng A - Struct, Vol: 400, Pages: 186 - 190
• Lin J, Liu Y, Farrugia D, Zhou M, 2005, Development of dislocation based-unified material model for simulating microstructure evolution in multipass hot rolling, Phil. Mag. A, Vol: 85, Issue: 18, Pages: 1967-1987.
• Garett R, Lin J, Dean T, 2005, An investigation of the effects of solution heat treatment on mechanical properties for AA 6xxx alloys: experimentation and modelling, Int. J. of Plasticity, Vol: 21, Issue: 8, Pages: 1640-1657.
• Garett R, Lin J, Dean T, 2005, Solution heat treatment and cold die quenching In forming AA6XXX sheet components: Feasibility study. Adv. Mat. Res., Vol: 6-8, Pages: 673-680.
• Lan F, Chen J, Yu X, Lin J, 2004, Springback simulation and analysis in U-typed sheet metal forming processes, J. of Plasticity Eng., Vol: 11, Issue: 5, Pages: 78-84.
• Wang C, Dean T, Lin J, 2004, Incremental Forming of solid cylindrical components using flow forming principles, J. of Mat. Proc. Tech., Vol: 153-154, Pages: 60-66.
• Ho K, Lin J, Dean T, 2004, Constitutive modelling of primary creep for age forming an aluminium alloy, J. of Mat. Proc. Tech., Vol: 153-154, Pages: 122-127.
• Zhu H, Zhang P, Balint D, Thorpe S, Elliott J, Windle A, Lin J, 2004, The effects of regularity on the geometrical properties of Voronoi tessellations, Physica A, Vol: 406, Pages: 42-58. 
• Lan F, Chen J, Lin J, 2004, Comparative analysis for but side structures and lightwe ight optimization, J. Automotive Eng., Vol: 218, Pages: 1067-1075.
• Garett R, Xu S, Lin J, Dean T, 2004, A model of the transformation of the austenite to bainite phase in producing dual phase steels, Int. J. of Machine Tools and Manufacture, Vol: 44/7-8, Pages: 831-837.
• Ho K, Lin J, Dean T, 2003, Modelling of springback in creep forming thick aluminium sheets, Int. J. of Plasticity, Vol: 20/4-5, Pages: 733-751.
• Liu Y, Lin J, 2003, Modelling of microstructural evolution in multipass hot rolling, J. of Mat. Proc. Tech., Vol: 143, Pages: 723-728.
• Wong C, Dean T, Lin J, 2003, A review of spinning, shear forming and flow forming processes, Int. J. of Machine Tools & Manufacture, Vol: 43, Pages: 1419-1435.
• Lin J, Liu Y, 2003, A set of unified cons titutive equations for modelling microstructural evolution in hot deformation, J. of Mat. Proc. Tech., Vol: 143, Pages: 281-285.
• Cheong B, Lin J, Ball A, 2003, Modelling the effects of grain-size gradients on necking in superplastic forming, J. of Mat. Proc. Tech., Vol: 134, Issue: 1, Pages: 10-18.
• Lin J, 2003, Selection of material models for predicting necking in superplastic forming, Int. J. of Plasticity, Vol: 19, Issue: 4, Pages: 469-481.
• Lin J, Cheong B, Yao X, 2002, Universal multi-objective function for optimising superplastic-dam age constitutive equations, J. of Mat. Proc. Tech., Vol: 125 -126, Pages: 199-205.
• Li B, Lin J, Yao X, 2002, A novel evolutionary algorithm for determining unified creep damage constitutive equations, Int. J. of Mech. Sci., Vol: 44, Issue: 5, Pages: 987-1002.
• Lin J, Dunne F, Hayhurst D, 2001, Errors in cre ep-cyclic plasticity testing: their quantification and correction for obtaining accurate constitutive equations, Int. J. of Mech. Sci., Vol: 43, Issue: 6, Pages: 1387-1403.
• Lin J, and Dunne F, 2001, Modelling grain growth evolution and necking in superplastic blow-forming, Int. J. of Mech. Sciences, Vol: 43, Issue: 3, Pages: 595-609.
• Lin J, Yang J, 1999, GA based multiple objective optimization for determining viscoplastic constitutive equations for superplastic alloys, Int. J. of Plasticity, Vol: 15, Pages: 1181-1196.
• Lin J, Dunne F, Hayhurst D, 1999, Aspects of testpiece design responsible for errors in cyclic plasticity experiments, Int. J. of Damage Mechanics, Vol: 8, Issue: 2, Pages: 109-137.
• Lin J, Dunne F, Hayhurst D, 1998, Approximate method for the analysis of component under cyclic plasticity damage, J. of Strain Analysis, Vol: 33, Issue: 1, Pages: 55-65.
• Lin J, Dunne F, Hayhurst D, 1996, Physically-based temperature dependence of elastic viscoplastic constitutive equations for copper between 20 and 500 C, Phil. Mag. A, Vol: 74, Issue: 2, Pages: 655-676.
• Dyson B, Hayhurst D, Lin J, 1996, The ridged uniaxial testpiece: large-displacement finite element predictions of creep fracture modes, strain in homogeneities and measurement errors, Phil. Trans. R. Soc. Lond A, Vol: 452, Pages: 655-676.
• Kowalewski Z, Lin J, Hayhurst D, 1994, Experimental and theoretical evaluation of a high-accuracy uniaxial creep testpiece with slit extensometer ridges, Int. J. of Mech. Science, Vol: 36, Issue: 8, Pages: 751-769.
• Lin J, Hayhurst D, Dyson B, 1993, A new design of uni-axial creep testpiece with slit extensometer ridges for improved accuracy of strain measurement, Int. J. of Mech. Science, Vol: 35, Issue: 1, Pages: 63-78. ,
• Othman A, Lin J, Hayhurst D, Dyson B, 1993, Comparison of creep rupture lifetimes of single and double notched bars, Acta metall. Mater, Vol: 41, Issue: 4, Pages: 1215-1222.
• Lin J, Hayhurst D, 1993, The development of a bi-axial tension test facility and its use to establish constitutive equations for leather, European J. of Mechanics, Vol: 12, Issue: 4, Pages: 493-507.
• Lin J, Hayhurst D, Howard I, Reedman D, 1992, Modelling of the performance of leather in a uni-axial shoe last simulator, J. of Strain Analysis, Vol: 27, Issue: 4, Pages: 187-196.