Citation

BibTex format

@article{Gu:2016:10.1016/j.compchemeng.2016.07.029,
author = {Gu, B and Xu, XY and Adjiman, CS},
doi = {10.1016/j.compchemeng.2016.07.029},
journal = {Computers and Chemical Engineering},
pages = {248--265},
title = {A predictive model for spiral wound reverse osmosis membrane modules: The effect of winding geometry and accurate geometric details},
url = {http://dx.doi.org/10.1016/j.compchemeng.2016.07.029},
volume = {96},
year = {2016}
}

RIS format (EndNote, RefMan)

TY  - JOUR
AB - A new one-dimensional predictive model for spiral wound modules (SWMs) applied to reverse osmosis membrane systems is developed by incorporating a detailed description of the geometric features of SWMs and considering flow in two directions. The proposed model is found to capture existing experimental data well, with similar accuracy to the widely-used plate model in which the SWM is assumed to consist of multiple thin rectangular channels. However, physical parameters that should in principle be model-independent, such as membrane permeability, are found to differ significantly depending on which model is used, when the same data sets are used for parameter estimation. Conversely, when using the same physical parameter values in both models, the water recovery predicted by the plate-like model is 12–20% higher than that predicted by the spiral model. This discrepancy is due to differences in the description of geometric features, in particular the active membrane area and the variable channel heights through the module, which impact on predicted performance and energy consumption. A number of design variables – the number of membrane leaves, membrane dimensions, centre pipe radius and the height of feed and permeate channels – are varied and their effects on performance, energy consumption and calculated module size are analysed. The proposed spiral model provides valuable insights into the effects of complex geometry on the performance of the SWM as well as of the overall system, at a low computational cost.
AU - Gu,B
AU - Xu,XY
AU - Adjiman,CS
DO - 10.1016/j.compchemeng.2016.07.029
EP - 265
PY - 2016///
SN - 1873-4375
SP - 248
TI - A predictive model for spiral wound reverse osmosis membrane modules: The effect of winding geometry and accurate geometric details
T2 - Computers and Chemical Engineering
UR - http://dx.doi.org/10.1016/j.compchemeng.2016.07.029
UR - http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000389169200019&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=1ba7043ffcc86c417c072aa74d649202
UR - http://hdl.handle.net/10044/1/52834
VL - 96
ER -

Contact us

Room 1M17, ACE Extension Building
Department of Chemical Engineering
Imperial College London, South Kensington Campus
London, SW7 2AZ, UK

Tel: +44 (0)207 594 2562