Citation

BibTex format

@article{Saceanu:2024:10.1016/j.ijrmms.2024.105898,
author = {Saceanu, MC and Paluszny, A and Ivars, DM and Zimmerman, RW},
doi = {10.1016/j.ijrmms.2024.105898},
journal = {International Journal of Rock Mechanics and Mining Sciences},
title = {Thermo-mechanical modelling of spalling around the deposition boreholes in an underground nuclear waste repository during its thermal phase},
url = {http://dx.doi.org/10.1016/j.ijrmms.2024.105898},
volume = {183},
year = {2024}
}

RIS format (EndNote, RefMan)

TY  - JOUR
AB - This paper presents a three-dimensional numerical analysis of multiple fracture growth leading to the development of excavation disturbed zones and spalling around deposition boreholes in a geological disposal facility. The development of fracture patterns is simulated with the Imperial College Geomechanics Toolkit, a finite-element based simulator that can model the simultaneous nucleation, growth, and coalescence of multiple fractures in quasi-brittle rock. In these simulations, fractures develop due to the stress concentrations around the borehole wall, caused by the local in situ stresses, and due to the thermal stresses caused by the radioactive decay of the waste. Fracture patterns, and the extent of the spalled zone, are computed after the borehole drilling, heating, and cooling stages, at the Forsmark repository site in Sweden. The effect of temperature on the nucleation and growth of spalling fractures, as well as on the reactivation of pre-existing fractures, is assessed qualitatively, by comparing fracture patterns, and quantitatively, in terms of the maximum spalling depth, width, and increase in the total fractured surface area. Overall, the simulations presented herein indicate that thermal spalling will increase the depths (away from the borehole) and angular widths of the spalled zone, but is not likely to lead to major increases in fracture aperture, and concomitant increases in hydraulic transmissivity and permeability of the spalled zone, above that which has already been caused by mechanical spalling.
AU - Saceanu,MC
AU - Paluszny,A
AU - Ivars,DM
AU - Zimmerman,RW
DO - 10.1016/j.ijrmms.2024.105898
PY - 2024///
SN - 1365-1609
TI - Thermo-mechanical modelling of spalling around the deposition boreholes in an underground nuclear waste repository during its thermal phase
T2 - International Journal of Rock Mechanics and Mining Sciences
UR - http://dx.doi.org/10.1016/j.ijrmms.2024.105898
VL - 183
ER -

Join the network

Contact Hsuan-Yi to join the network.