@article{Amtmann:2024:10.5194/gi-13-177-2024,
author = {Amtmann, C and Pollinger, A and Ellmeier, M and Dougherty, M and Brown, P and Lammegger, R and Betzler, A and Agú, M and Hagen, C and Jernej, I and Wilfinger, J and Baughen, R and Strickland, A and Magnes, W},
doi = {10.5194/gi-13-177-2024},
journal = {Geoscientific Instrumentation, Methods and Data Systems},
pages = {177--191},
title = {Accuracy of the scalar magnetometer aboard ESA's JUICE mission},
url = {http://dx.doi.org/10.5194/gi-13-177-2024},
volume = {13},
year = {2024}
}

Download

TY  - JOUR
AB  - This paper discusses the accuracy of the scalar Coupled Dark State Magnetometer on board the Jupiter Icy Moons Explorer (JUICE) mission of the European Space Agency (ESA). The scalar magnetometer, referred to as MAGSCA, is part of the J-MAG instrument. MAGSCA is an optical omnidirectional scalar magnetometer based on coherent population trapping, a quantum interference effect, within the hyperfine manifold of the 87Rb D1 line. The measurement principle is only based on natural constants; therefore, it is in principle drift-free, and no calibration is required. However, the technical realisation can influence the measurement accuracy. The most dominating effects are heading characteristics, which are deviations of the magnetic field strength measurements from the ambient magnetic field strength. These deviations are a function of the angle between the sensor axis and the magnetic field vector and are an intrinsic physical property of the measurement principle of the magnetometer. The verification of the accuracy of the instrument is required to ensure its compliance with the performance requirement of 0.2 nT (1σ) with a data rate of 1 Hz. The verification is carried out with four dedicated sensor orientations in a Merritt coil system, which is located in the geomagnetic Conrad Observatory (COBS). The coil system is used to compensate the Earth's magnetic field and to apply appropriate test fields to the sensor. This paper presents a novel method to separate the heading characteristics of the instrument from residual (offset) fields within the coil system by fitting a mathematical model to the measured data and by the successful verification of the MAGSCA performance requirement.
AU  - Amtmann,C
AU  - Pollinger,A
AU  - Ellmeier,M
AU  - Dougherty,M
AU  - Brown,P
AU  - Lammegger,R
AU  - Betzler,A
AU  - Agú,M
AU  - Hagen,C
AU  - Jernej,I
AU  - Wilfinger,J
AU  - Baughen,R
AU  - Strickland,A
AU  - Magnes,W
DO  - 10.5194/gi-13-177-2024
EP  - 191
PY  - 2024///
SN  - 2193-0856
SP  - 177
TI  - Accuracy of the scalar magnetometer aboard ESA's JUICE mission
T2  - Geoscientific Instrumentation, Methods and Data Systems
UR  - http://dx.doi.org/10.5194/gi-13-177-2024
VL  - 13
ER  - 

Download