Research Articles
Results
- Showing results for:
- Reset all filters
Search results
-
Conference paperRibichini R, Cegla F, Nagy PB, et al., 2012,
ASSESSMENT OF THE PERFORMANCE OF DIFFERENT EMAT CONFIGURATIONS FOR SHEAR HORIZONTAL AND TORSIONAL WAVES
, 38th Annual Review of Progress in Quantitative Nondestructive Evaluation (QNDE), Publisher: AMER INST PHYSICS, Pages: 955-962, ISSN: 0094-243X- Author Web Link
- Cite
- Citations: 3
-
Journal articleJackson MD, Leinov E, 2012,
On the Validity of the “Thin” and “Thick”Double-Layer Assumptions When CalculatingStreaming Currents in Porous Media
, International Journal of Geophysics, Vol: 2012, ISSN: 1687-8868We find that the thin double layer assumption, in which the thickness of the electrical diffuse layer is assumed small comparedto the radius of curvature of a pore or throat, is valid in a capillary tubes model so long as the capillary radius is >200 times thedouble layer thickness, while the thick double layer assumption, in which the diffuse layer is assumed to extend across the entirepore or throat, is valid so long as the capillary radius is >6 times smaller than the double layer thickness. At low surface chargedensity (<10 mC · m−2) or high electrolyte concentration (>0.5 M) the validity criteria are less stringent. Our results suggest thatthe thin double layer assumption is valid in sandstones at low specific surface charge (<10 mC · m−2), but may not be valid insandstones of moderate- to small pore-throat size at higher surface charge if the brine concentration is low (<0.001 M). The thickdouble layer assumption is likely to be valid in mudstones at low brine concentration (<0.1 M) and surface charge (<10 mC·m−2),but at higher surface charge, it is likely to be valid only at low brine concentration (<0.003 M). Consequently, neither assumptionmay be valid in mudstones saturated with natural brines.
-
Journal articleRajagopal P, Drozdz M, Skelton E, et al., 2012,
On the use of absorbing layers to simulate the propagation of elastic waves in unbounded isotropic media using commercially available Finite Element packages
, NDT and E International, Vol: TBC -
Journal articleRajagopal P, Skelton EA, Choi W, et al., 2012,
A generic hybrid model for bulk elastodynamics, with application to ultrasonic non-destructive evaluation
, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, Vol: 59, Pages: 1239-TBC -
Journal articleJones RE, Simonetti F, Lowe MJS, 2012,
Use of microwaves for the detection of water as a cause of corrosion under insulation
, Journal of Nondestructive Evaluation, Vol: 31, Pages: 65-76 -
Journal articleJackson MD, Gulamali MY, Leinov E, et al., 2012,
Spontaneous Potentials in Hydrocarbon Reservoirs during Waterflooding: Application to Waterfront Monitoring
, SPE Journal -
Journal articleRibichini R, Cegla F, Nagy PB, et al., 2011,
Study and Comparison of Different EMAT Configurations for SH Wave Inspection
, IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL, Vol: 58, Pages: 2571-2581, ISSN: 0885-3010- Author Web Link
- Cite
- Citations: 127
-
Journal articleMilne K, Cawley P, Nagy PB, et al., 2011,
Ultrasonic Non-destructive Evaluation of Titanium Diffusion Bonds
, JOURNAL OF NONDESTRUCTIVE EVALUATION, Vol: 30, Pages: 225-236, ISSN: 0195-9298- Author Web Link
- Cite
- Citations: 23
-
Journal articleXi X, Cegla FB, Lowe M, et al., 2011,
Study on the bubble transport mechanism in an acoustic standing wave field
, ULTRASONICS, Vol: 51, Pages: 1014-1025, ISSN: 0041-624X- Author Web Link
- Cite
- Citations: 28
-
Journal articleHuthwaite P, Simonetti F, 2011,
High-resolution imaging without iteration: A fast and robust method for breast ultrasound tomography
, JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, Vol: 130, Pages: 1721-1734, ISSN: 0001-4966- Author Web Link
- Open Access Link
- Cite
- Citations: 76
-
Journal articleGulamali MY, Leinov E, Jackson MD, 2011,
Self-potential anomalies induced by water injection into hydrocarbon reservoirs
, Geophysics, Vol: 76, Pages: F283-F292, ISSN: 1942-2156The injection of cold water into a hydrocarbon reservoir containingrelatively warmer, more saline formation brine may generateself-potential anomalies as a result of electrokinetic,thermoelectric, and=or electrochemical effects. We havenumerically assessed the relative contributions of these effectsto the overall self-potential signal generated during oil productionin a simple hydrocarbon reservoir model. Our aim was todetermine if measurements of self-potential at a production wellcan be used to detect the movement of water toward the well.The coupling coefficients for the electrochemical and thermoelectricpotentials are uncertain, so we considered four differentmodels for them. We also investigated the effect of altering thesalinities of the formation and injected brines. We found thatthe electrokinetic potential peaked at the location of the saturationfront (reaching values of 0.2 mV even for the most salinebrine considered). Moreover, the value at the production wellincreased as the front approached the well, exceeding the noiselevel ( 0.1 mV). Thermoelectric effects gave rise to largerpotentials in the reservoir (10 mV), but values at the wellwere negligible ð Þ .0:1 mV until after water breakthroughbecause of the lag in the temperature front relative to the saturationfront. Electrochemical potentials were smaller in magnitudethan thermoelectric potentials in the reservoir but were measurableð Þ > 0:1 mV at the well because the salinity front wasclosely associated with the saturation front. When the formationbrine was less saline (1 mol=liter), electrokinetic effects dominated;at higher salinities (5 mol=liter), electrochemicaleffects were significant. We concluded that the measurement ofself-potential signals in a production well may be used to monitorthe movement of water in hydrocarbon reservoirs duringproduction, but further research is required to understand thethermoelectric and electrochemical coupling coefficients in partiallysatu
-
Conference paperDuxbury D, Lowe M, Russell J, 2011,
Effects of variation in phased array element performance
When phased array probes are used for ultrasonic inspection it is necessary to ensure that consistent performance is achieved. If Full Matrix Capture (FMC) is used to record inspection data the most appropriate way of doing this is to assess transducer performance on an element by element basis rather than assess a specific beam.The rationale for this approach is that any beam can be synthetically produced from FMC data, so it is not logical to couple probe calibration with a particular beam. This paper presents a model based study that aims to place specifications on element performance. The effect of element sensitivity, phase, and non-functioning elements has been investigated using an array beam model, based on Huygen's principle, to carry out Monte Carlo simulations. This has revealed that the dominant result of variations in element performance is the introduction of beam artefacts, such as the creation of side lobes. Results will be presented from simulations of a number of beam types at several centre frequencies that show that focused beams are more resistant to artefacts than plane beams, and the effect of element phase is dependant on probe bandwidth. General guidelines for acceptable variations between elements will also be presented. © (2011) by the British Institute of Non-Destructive Testing. All rights reserved.
-
Journal articleLowe M, Saffari N, Lhemery A, et al., 2011,
Journal of Physics: Conference Series: Preface
, Journal of Physics: Conference Series, Vol: 269, ISSN: 1742-6588 -
Journal articleCegla FB, Cawley P, Allin J, et al., 2011,
High-Temperature (>500°C) Wall Thickness Monitoring Using Dry-Coupled Ultrasonic Waveguide Transducers
, IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL, Vol: 58, Pages: 156-167, ISSN: 0885-3010- Author Web Link
- Open Access Link
- Cite
- Citations: 117
-
Conference paperCegla F, Cawley P, Allin J, et al., 2011,
Ultrasonic Wall Thickness Monitoring at High Temperatures (>500°C)
, 8th International Workshop on Structural Health Monitoring, Publisher: DESTECH PUBLICATIONS, INC, Pages: 767-+ -
Conference paperHuthwaite P, Simonetti F, 2011,
On the Measurement of Ultrasound Transmission Through a Penetrable Acoustic Cone
, Conference on Medical Imaging - Ultrasonic Imaging, Tomography, and Therapy, Publisher: SPIE-INT SOC OPTICAL ENGINEERING, ISSN: 0277-786X -
Conference paperFan Z, Lowe MJS, 2011,
SCATTERING OF WELD GUIDED MODES FROM DEFECTS LOCATED AROUND THE WELD
, 37th Annual Review of Progress in Quantitative Nondestructive Evaluation (QNDE), Publisher: AMER INST PHYSICS, Pages: 153-160, ISSN: 0094-243X- Author Web Link
- Cite
- Citations: 1
-
Conference paperRajagopal P, Skelton E, Lowe M, et al., 2011,
GENERIC TIME-DOMAIN HYBRID MODELS FOR ULTRASONIC NDE
, 37th Annual Review of Progress in Quantitative Nondestructive Evaluation (QNDE), Publisher: AMER INST PHYSICS, Pages: 67-74, ISSN: 0094-243X- Author Web Link
- Cite
- Citations: 1
-
Conference paperDuxbury D, Russell J, Lowe M, 2011,
DESIGNING A CALIBRATED FULL MATRIX CAPTURE BASED INSPECTION
, 37th Annual Review of Progress in Quantitative Nondestructive Evaluation (QNDE), Publisher: AMER INST PHYSICS, Pages: 851-858, ISSN: 0094-243X- Author Web Link
- Cite
- Citations: 2
-
Conference paperJones RE, Simonetti F, Lowe MJS, et al., 2011,
USE OF MICROWAVES FOR THE DETECTION OF CORROSION UNDER INSULATION: A SENSITIVITY STUDY
, 37th Annual Review of Progress in Quantitative Nondestructive Evaluation (QNDE), Publisher: AMER INST PHYSICS, Pages: 1714-1721, ISSN: 0094-243X- Author Web Link
- Cite
- Citations: 2
This data is extracted from the Web of Science and reproduced under a licence from Thomson Reuters. You may not copy or re-distribute this data in whole or in part without the written consent of the Science business of Thomson Reuters.